We – EPG Team the most significant gearbox & motors , couplings and gears factory in China with 5 diverse branches. For a lot more specifics: Mobile/whatsapp/telegram/Kakao us at: 0086~13083988828 13858117778083988828
Large velocity Glazed Tile Forming Equipment
B Machine Specifications
| one. | Power necessity |
Variety | 380v/3ph/50hz | |
| Main Motor power | five.5kw with servo motor | |||
| Cutter power | 7.5kw | |||
| two. | Forming speed(m/min) | 8m/min | Not include the time of cutting | |
| 3. | Forming stations | 12 | Depend on actual design | |
| 4. | Thickness of structure | 14mm | ||
| five. | Forming shaft diameter(mm) | 70 | ||
| six. | Chains | 1 inch | ||
| 7. | Sleeve | galvanized pipe with color coating | ||
| eight. | Type of cutting | Roll formed and length-set cutting | ||
| nine. | Control system | PLC Panasonic Inverter Schneider | ||
| ten. | Install dimension(depend on the final design) | 6.2m×1.35m×1.2m | Without panel length | |
| 11. | Total weight (Approx) | 4T | Depend on final design | |
| 12. | Screen | Text screen /touch screen | ||
Roller material: Substantial quality NO. forty five forged steel, plated hard chrome on the surface of roller with thickness .05mm.
Energetic shaft material: Substantial quality NO. forty five carbon wrought metal at diameter 72mm.
Reducing blade: Cr12 mould metal with quenched remedy.
Manual decoiler
It is passive type could load coil by expend the blots fix at coil inner diameter.It’s easy to operate and economical solution.
Xihu (West Lake) Dis. device
Adopt guiding bar and sliding block to control the width and position of the steel sheet. The coil is guided in the correct position and passed to the roll forming system. Can adjust the guiding bar with loosing the fixing bolts to feed sheet in right position. It’s fixed structure to make sure can not move easily.
Roll Forming System:
Roll forming system consist of machine frame, transmission system, electrical motor and roll forming system.
A. Machine frame adopts welding structure with shot blasting and painting treatment
B. All rollers material adopt high quality No.45 steel, with hard chrome coated on surface, all treatment by full CNC machines, to make sure the rollers with good rigidity and precision, and form perfect roofing sheet as per design.
C. All rolling shafts are made by high quality No.45 steel with quench and temper treatment, so the shafts with good rigidity which could use for long tern without deformation.
D. Rolling shafting supporting structure type is steel wall and welded with the basement together to have rigidity.
E. Cycloidal pin gear speed reducer motor driven, the back/forward roller driven by chain, part of upper/lower rollers driven by gear
F. Adjust the screw bar manually to adjust the distance between upper/lower rollers for difference thickness of sheet.
(Interest: all rolling system has adjusted in our company as a perfect situation, we don’t suggest to adjust the rollers at random, if necessary, should adjust by a experienced technician or after train by our engineer. Otherwise will cause the machine can not form a good profile
Cutting device
A. Adopts post cutting, the cutting blade material is Cr12 with quenched treatment, after cutting, there is no material wasted.
B. Adopts welded frame for good rigidity.
C. The cutting action is droved by the power from hydraulic station which guarantees the procession of the cutting and low noisy, long life.
Hydraulic System
It is controlled by gear wheel oil pump. After filling the hydraulic oil into the hydraulic oil tank, the pumps drive the cutter machine to begin the cutting job.
The system includes a set of hydraulic tank, a set of hydraulic oil pump, two hydraulic pipes. And two sets of electromagnetism valves.
Power of the oil pump: 3kw
Hydraulic oil :forty#
PLC control system
It adopts industrial computer to control. The target piece’s length is adjustable and digit of it can be adjusted. Computed mode has two modes: automatic and manual one. The system is easy to operate and use.
Processing precision : within 1.00mm
It contains liquid crystal screen, programmer, transformer for the electronic machines and kits of every part. Touch screen
PLC is ZheJiang Panasonic
Transducer brand is ZheJiang taida
The seller should provide Chinese and English language screen
Counter
One counter gauges length, pulses, and decides length.
They are commonly utilized as the roof of backyard garden like manufacturing unit, resort, exhibition centre, villa, civil building, etc.
The use of first equipment manufacturer’s (OEM) portion numbers or logos , e.g. CASE® and John Deere® are for reference reasons only and for indicating item use and compatibility. Our company and the detailed substitution areas contained herein are not sponsored, accredited, or created by the OEM.
